POWER
SERVO 260
A M P L I F I E R
CLIP
CLIP
IDLE
S A M S O N
SERVO - 260
STUDIO AMPLIFIER 120 WATT STEREO
PROTECTION
IDLE
POWER
MAX
MAX
∞
∞
SERVO 260 STUDIO AMPLIFIER
S A M S O N
CAUTION
FUSE
6A/250V
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
TO PREVENT SHOCK DO NOT
OPEN. NO USER SERVICABLE
PARTS INSIDE. REFER SERVICING
CAUTION
T
O
Q
U
A
L
I
F
I
E
D
S
E
R
V
I
C
E
HEATSINK MAY BE HOT!
DO NOT BLOCK AIRFLOW
OR OVERHEATING MAY
OCCUR.
PERSONNEL. TO PREVENT FIRE
OR SHOCK HAZARD DO NOT
EXPOSE TO RAIN OR MOISTURE.
CAUTION
;
REPLACE WITH
THE SAME TYPE FUSE AS
INDICATED. UTILISER UN
FUSIBLE DE RECHANGE DE
MEME TYPE.
~AC INPUT
115V/60Hz, 490W
R
L
S/N
(UNBALANCED 10KΩ/0dBM)
RIGHT LEFT
USE CLASS 2 WIRING MINIMUM LOAD IMPEDANCE 4 Ω
LEFT
RIGHT
+RIGHT
GROUND
LEFT+
INPUTS
(BALANCED 10KΩ/0dBM)
• Rack-mount stereo power amplifier (2-space).
• 130 watts per channel into 4 ohms (stereo).
• 20 Hz to 50 kHz frequency response.
The Servo 260 power amplifier is designed for
fixed installations, recording and live performance use.
Easily installed, this compact, 2-space rack-mount stereo
power amplifier delivers 130 watts per channel into a 4
ohm load, over a bandwidth of 20 Hz to 50 kHz. The
260 features high-current output power transistors with
a bipolar design and servo circuitry that continuously
keeps DC output during idling at or near 0 volts. It also
features balanced 1/4" Tip-Ring-Sleeve inputs as well as
push-spring terminal outputs, front-panel clip, idle and
protection lights and thermal and overcurrent protec-
tion circuitry. The Servo 260 is convection cooled for
silent operation, eliminating both fan noise and the
need for filter maintenance. Housed in a rugged steel
chassis, the Servo 260 uses high-quality component to
ensure safe, reliable performance in all applications.
• Balanced 1/4″ TRS and unbalanced RCA inputs and push-
spring terminal outputs.
• 1/4″ and push-spring terminal outputs.
• Turn-on muting to prevent speaker “thumps.”
• Servo protection circuitry continuously keeps DC output
during idling at or near 0 V (thus keeping idle speakers at
their 0 point).
• Protection circuitry against overheating and
overcurrent.
• High-current output power transistors.
• Unique bipolar circuit design.
• Front-panel clip, idle and protection lights.
• Independent left- and right-channel input controls with
41-position detents.
Contact:
• Convection cooled (No Fan).
• All-steel chassis with new black matte titanium finish and
anodized aluminum heat sink.
Samson Technologies Corp., P.O. Box 9031, Syosset, NY 11791-9031 • Phone: (516) 364-2244 • Fax: (516) 364-3888 • www.samsontech.com
|
QSC Audio Thermometer DSP 4 User Guide
Raymarine GPS Receiver 530 User Guide
RedMax Saw SGCZ2450S User Guide
Renesas Network Card PCA7426G02 User Guide
Ryobi Outdoor Trimmer BC30 ZR30004 User Guide
Ryobi Saw R10633 User Guide
Sanyo Camcorder VCC 9300 User Guide
Sanyo Flat Panel Television CE22LD90DV B User Guide
Savin Printer SLP38C User Guide
Schneider Electric Outboard Motor Altivar 12 User Guide